Panasonic NE-1024F Operating Instructions Manual page 17

D. To Select Beep Tone Options:
The Beep Tone can be set. ON or OFF.
Open the door.
@
E ''-
@
1 .
Display Window
.Press the PFOG. Pad.
The display will not change.
.Press the Memory Pad 0.
.Repeat pressing ol 0 Pad. Select "OFF"
of Beep Tone.
Stage lndicator l -ON
S t a g e l n d i c a t o r 2 = O F F
.Press the PROG. Pad again.
You have completed programming
t h e b e e p t o n e .
.2 seconds later, the Display Window will
go blank.
.While pressing STOP/RESET Pad,
press POWER Levei Selector Pad. The
display shows the total cumulative number of
trmes the oven has been used.
Example:
.9999 means, the oven has been
used 999900 times.
.0020 means the oven has been
used 2000 times.
. lf the total cumulative number
of times less than 100 times, the
display will not be changed.
.2 seconds later, "0" will reappear in the
Display Window.
l
z
m
(t
5
-.t
E. To Read the Cycle Counter:
The oven can dispiay the total number of times the oven has been operated cumulatively.
Great for analyzing usage of the oven and tratfic flow at the,ocation.
1 . Open the door.
I STOP,/RESET I
+
lrr;
u9ry5r.l
Disolay Window
- 1 7 -