Heating; M A N U A L S I N G L E S T A G E H E A T I N; M A N U A L 2 O R 3 S T A G E H E A T I N - Panasonic NE-1024F Operating Instructions Manual

HEATING
Open the door and place food in lhe oven cavity. Close the door. "0" must be shor,ving in the Display Window.
A. Manual Single Stage Heating:
This fealure gives the user maximum llexibility to set the oven to desired heating time and power level. Ideal for menus that
require various h€ating requirements.
Example: To heat for 2 minutes at High Power
s
Lr)
lU
z
t P o w E R
I
E3
Oisplay Window
i l
l -
l
FTO]
l _ t s e )
L U -
q , -
1 .
.Press the POWER Level Selector
Pad one time.
.Press the Memory Pads 2, 0 and 0.
. @
.Press the START Pad.
Heating will start.
The time in the Display Window will
count down.
.All heating will stop.
When opening the door, the
display will stop blinking.
4. Beep tone will sound.
B. Manual 2 or 3 Stage Heating:
This feature allows you to set to begin heating at one power level then shitt automatically to a different power level after the
designated amount of heating time.
Example: To heat tor 2 minutes at D€lrost power tor 2 stage heating
Displav Window
-
-----l_-=
r
- l
, ,
fe-Df,
L l q 0 l
trg
T-
-
ff-l
I
u l
For a 3 slage heating cycle, select a power level again and set the cooking time, between steps 3 and 4 above.
SPECIAL NOTE: For both single and 2 or 3 stage heating.
1. While heating, one louch on the STOP/RESET Pad stops the oven. You can restart by pressing the START Pad or a second
touch on the STOP/RESET Pad will cancelthe selected program.
2. One touch on the STOP/RESET Pad, before the heatjng cycle is started, will cancelthe selected program.
1, Follow steps 1 and 2 above.
' @
[il;
t PowER
I
4;-l
5. Beep tone will sound.
NOTE:
.Press the POWER Level Selector
Pad 5 times. Indicator will change
each time the pad is pressed.
.Press the Memory Pads 2, 0 and 0.
.Press the START Pad.
The totaltime for both stages will be
displayed. The oven lamp will be
turned on. Heating will start.
.The time in the Display Window will
count down.
.When oven shifts to the ngxt stage, a
single beep tone will sound.
.All heating will slop.
When opening the door, the display
will stop blinking.
- 1 0 -