How To Operate; Power Level Selector Pad; Manual Heating - Panasonic NE-1252 Operating Instructions Manual

POWER LEVEL SELECTOR PAD

Each time the pad is pressed, the Power Level switches as the illustration below.
P10 P9
P2 P1
P10: Models No. NE-1252 (1200 W), NE-1752 / NE-1772 (1700 W), NE-2152 (2100 W)
HIGH
P9:
P8:
MEDIUM
HIGH
P7:
P6:
P5:
MEDIUM
P4:
*: "LOW (P2)" for Model No. NE-1252 is 30%.
A. MANUAL HEATING — single stage heating —
Example: To cook food at HIGH power for 2 minutes
PAD
1
Place food inside the oven and close the door.
The oven lamp will turn on and "0" will appear.
Note: While "0" appears, operation is available. 1 minute after the door is
2
Press Power Level Selector pad once.
The selected power level will be indicated and 1st Stage Heating
Indicator "1" will start to blink.
Note: Each time the pad is pressed, the Power Level switches as the
3
Press Number/Memory pads "2", "0" and "0".
The set heating time will appear.
Note: The maximum set time for "DEFROST" and "P0" is 30 minutes, and
4
Press Start pad.
The oven lamp will turn on and heating will start.
During operation, the indicator appears from the left and heating time
will count down.
• When all time expires, beep tone will sound and heating will stop. The oven lamp will turn
off. "0000" will blink until the door is opened. 1 minute later, cooling fan will stop.
• Open the door and take the food out. The oven lamp will turn on. Digital Display Window
will show the originally selected time and power stage.
• Close the door. The oven lamp will turn off. 1 minute later, Digital Display Window will go
blank.

How to Operate

P8 P7
P0 PU1
95 %
LOW
85 %
75 %
DEFROST
65 %
55 %
—
45 %
INSTRUCTION
closed, "0" will disappear.
above Power Level Selector pad illustrates.
15 minutes for all others.
P6 P5
PU2 PL1
P3: 35 %
P2: 25 %*
P1: 340 W
P0: 0 %
- 9 -
P4 P3
PL2 P10 again.
PU1:
HEAT FROM
TOP DOWN
PU2:
PL1:
HEAT FROM
BOTTOM UP
PL2:
DIGITAL DISPLAY WINDOW
50 %
25 %
50 %
25 %