Programming Double Or Triple Quantity Pad; Program Lock - Panasonic NE-2157R Operating Instructions Manual

D. PROGRAMMING DOUBLE OR TRIPLE QUANTITY PAD
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCk IS ACTIVATED! (SEE PAGE 11-12)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program 1.5 times of heating time for double quantity into Number/Memory pad "5"
PAD
1 keep the door closed.
Digital Display Window must be blank.
2 Press Prog pad.
PROG
"PROG" will start to blink.
Press Number/Memory pad "5".
3
5
The selected pad number will appear and currently programmed
information will be indicated.
Press Double Quantity pad.
4
x
2
The currently programmed magnification number will appear.
Note: 1.6 times is preset at factory.
Press Number/Memory pads "1" and "5" for 1.5 times.
5
1 5
The programmed magnification number will appear.
If pad 5 is programmed for 3 minutes, the time for the double quantity
will be 4 minutes and 30 seconds.
Available range is 0.1-5.0 times.
6 Press Prog pad.
PROG
"PROG" will stop blinking.
This means that you have completed programming.
• Three seconds later, Digital Display Window will go blank.
Note:
• If you want to program your desired magnification number for triple quantity, repeat as above, using Triple
Quantity pad instead of Double Quantity pad.
E. PROGRAM LOCk
X To Activate Program Lock:
Example: To program cooking at DEFROST power for 1 minute into Number/Memory pad "5"
PAD
1 keep the door closed.
Digital Display Window must be blank.
Press Prog pad until "PROG", "P" and "L" appear. (more than five
2
PROG
seconds)
"PROG", "P" and "L" will appear.
In Program Lock mode:
• The oven is started by pressing the desired Number/Memory pad. There is no need to press Start pad.
• Opening the door cancels the remaining time on the program.
• The oven can not be programmed or run manually until the program lock is released.
How to Operate
INSTRUCTION
INSTRUCTION
- 11 -
DIGITAL DISPLAY WINDOW
PROG
PROG
1
HI
PROG
PROG
PROG
DIGITAL DISPLAY WINDOW
PROG