Panasonic BL-C1A Operating Instructions Manual page 93

Setting
Display
IP Address or
*1
Host Name
*2
Port No.
Camera Name
*3
*1 Set 4 numbers (0—255) and 3 periods, such as "192.168.0.253". Note that
"0.0.0.0" and "255.255.255.255" are not available.
Enter ASCII characters for the host name (see page 131). Note that [Space],
*2
["], ['], [#], [&], [%], [=], [+], [?], [<] and [>] are not available.
Enter 1—255 characters.
You can enter ASCII characters (see page 131) or characters from other
*3
languages (1—15 characters for a 1-byte character and 1—7 characters for a
2-byte character). Note that [Space], ["], ['], [#], [&], [%], [=], [+], [?], [:], [<], and
[>] are not available.
Note
• If your camera will only be accessed on your local network, use each
camera's local IP address and port number.
• If you intend to access your camera from the Internet, you must use each
camera's host name (global IP address) and the port number.
4.
Click [Save] when finished.
• The new settings are saved.
• The Multi-Camera Setup page is displayed.
• Check this box to enable the camera.
• Set an IP address or host name to enable the camera.
• Set a port number (1—65535).
• This camera name is displayed only on the Multi-Camera
page.
[For assistance, please call: 1-800-272-7033]
Description
Operating Instructions
93