Panasonic BL-C1A Operating Instructions Manual page 61

Setting
Trigger
4.
Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page 48).
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting
Day of the week •
Active Time of
Trigger
5.
Set the image settings, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
• Selecting [Timer] enables the camera to buffer/transfer
images during the specified date and time by timer.
• Selecting [Motion Detection] enables the camera to buffer/
transfer images when the motion is detected during the
specified date and time.
Check the box to enable the day. Uncheck the box to
disable it.
• To set a trigger time, check the time option and set a time
period. Check the [Always] option if you are not specifying
a time period.
[For assistance, please call: 1-800-272-7033]
Description
Description
Operating Instructions
61