Installation - Gardner Denver 9VXRD Series Instruction Manual

IMPORTANT - Read prior to starting this equiptment.

1.0 INSTALLATION

1.1 Location
A. For typical placement in a compressed air system, see
drawing at right.
B. Air compressor intake - Locate air compressor so that
contaminants potentially harmful to the dryer (e.g.
ammonia) are not drawn into the air system.
C. Air-cooled units - Free air flow - Ambient air should be
free to flow across the refrigeration condenser. Do not
block either side of the cabinet. Leave at least 36 inches
(915 mm) clearance for free air flow.
DRAIN
ASSY.
(2)
MANUAL
DRAIN
AUTOMATIC
ELECTRICAL
DRAIN
ENCLOSURE
LEFT SIDE VIEW
AIR OUT
ELECTRICAL
ENTRY
MANUAL
DRAIN
AUTOMATIC
DRAIN
FRONT VIEW
1.2 Mounting
A. Mount dryer on firm level surface.
B. Dryers are furnished with removable shipping pads.
Remove prior to installation if desired. Dryers may be
bolted to the floor if desired.
NOTE: Outdoor installation: Standard dryers are designed
for indoor installation. Contact manufacturer if installing
outdoors.
SEPARATOR
COMPRESSOR AFTERCOOLER
AIR IN
CONTROL PANEL
RECEIVER
TANK
REMOVAL
AUTOMATIC DRYER FILTER
DRAINS
SERIAL TAG
INSTRUCTION TAG
BLOW OFF GUN
FOR CONDENSER CLEANING
RIGHT SIDE VIEW
OIL
CONDENSER
3