Finding A Scene You Want To Play Back; Still Playback/Still Advance Playback; Playing Back A Memory Card - Panasonic PV-GS36 Operating Instructions Manual

Finding a Scene You Want to Play
Back
• Set to Tape Playback Mode.
• The One-Touch Navigation icon is displayed on the
lower right of the screen.
Cue/ Review Playback
1
Move the Joystick Control [◄] or [►]
during Playback.
• It turns to Cue Playback
Playback
A
S P 3 h 5 9 m 5 9 s 2 9 f
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 6
Notes:
• If the Joystick Control is held continuously, it turns
to Cue Playback or Review Playback until you
release it.
• During Cue/Review playback, fast-moving images
may show noise as a mosaic.
• Before and after Cue/Review playback, the screen
may become blue for a moment or images may be
disturbed.
Still Playback/ Still Advance
Playback
This Camcorder is capable of still picture playback
and frame-advance playback.
• Set to Tape Playback Mode.
• The One-Touch Navigation icon is displayed on the
lower right of the screen.
1
Move the Joystick Control [▲] to start
playback.
2
Move the Joystick Control [▲] again.
• The playback image stops in the Still Playback
Mode.
40
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
or Review
A
.
B
[One-Touch Navigation icon]
B
S P 3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
1 2 : 3 4 : 5 6 A M
2 8 J A N 2 2 0 0 6
[One-Touch Navigation icon]
3
Push the [W/T] Lever.
• The [ΙΙ►] or [◄ΙΙ] Indication appears.
• With each push of the [W] Button, still pictures
advance in the reverse direction.
With each push of the [T] Button, still pictures
advances in the forward direction.
If you keep pushing the Lever, still pictures
advance continuously.
To Resume Normal Playback
Move the Joystick Control [▲] again.
Note:
• If the Camcorder is left in the Still Playback Mode
for more than 5 minutes, the Camcorder switches
to the Stop Mode to protect the video heads from
excessive wear and tear.
R 2 : 0 0

Playing Back a Memory Card

It plays back files recorded on a Card.
• Open the LCD Monitor or extend the Viewfinder
2 8
before turning on the power.
1
Set the [OFF/ON] Switch to [ON].
• The [STATUS] Indicator lights Red.
2
Set the Mode Dial to Picture Playback
Mode.
• The [
displayed on the screen.
• The One-Touch Navigation icon is displayed
on the lower right of the screen.
3
Start Playback.
Joystick Control [▲] : Starting the Slide Show
Joystick Control [▼] : Erase the pictures
Joystick Control [◄] : Playing back the
Joystick Control [►] : Playing back the next
CARD PLAYBACK MODE] is
[One-Touch Navigation icon]
Stop the Slide Show
previous picture
picture