Playback Mode; Playing Back A Tape; Finding A Scene You Want To Play Back - Panasonic PV-GS400 Operating Instructions Manual

Playback Mode

Playing Back a Tape

The recorded scene can be played back
immediately after the recording.
1
Set the [OFF/ON] Switch
≥The [POWER] Lamp
(46)
POWER
ON
(48)
2
(44)
Set the Mode Dial
Mode.
(44)
3
Press the [6] Button
tape.
STILL
(21)
ENTER
FADE
≥Rewind the tape to the point where you want
to start playback.
≥When the tape reaches the beginning,
rewinding stops automatically.
4
Press the [1] Button
≥The [!] Indication appears.
STILL
(19)
ENTER
FADE
≥If a cassette recorded with a copyright
protection signal is played back, the picture is
distorted by mosaic-like patterns.
To Stop Playback
Press the [∫] Button (20)
STILL
ENTER
(20)
FADE
44
Playback Mode
(48) to [ON].
(46)
lights up.
to Tape Playback
(21) to rewind the
(19) to start playback.
.
ª Adjusting the Sound Volume
To adjust the volume, push the [`VOL/JOG_]
(51)
Lever to display the [VOLUME] Indication.
Push the [`VOL/JOG_] Lever towards [T] to
increase the volume or push the [`VOL/JOG_]
Lever towards [W] to decrease the volume. The
[VOLUME] Indication goes off after the
adjustment is finished.
VOL/JOG
W T
(51)
To adjust the volume with the Remote Controller,
press the [T] or [W] Button to display the
[VOLUME] Indication. Press the [T] Button to
increase the volume or press the [W] Button to
decrease the volume. The [VOLUME] Indication
goes off after the adjustment is finished.
≥The sound volume cannot be adjusted using the
Remote Controller in Playback Zoom Mode.
( )
-46-
≥For other notes concerning this item, see
Finding a Scene You Want to Play
Back
ª Cue/Review Playback
STILL
ENTER
FADE
(21) (18)
If the [5] Button (18)
pressed during Playback, it turns to Cue Playback
A or Review Playback B.
A
≥If the Button is held continuously, it turns to Cue
Playback or Review Playback until you release
it.
.
-79-
or [6] Button (21) is
B