Recording Yourself; Recording With The Built-In Led Video Light - Panasonic PV-GS36 Operating Instructions Manual

RapidFire Consecutive Photoshot
The still pictures can be recorded on a Card at
regular intervals.
1
Set [ ADVANCED] >> [
>> [ON].
• The [ ] Indication appears.
2
Press and hold the [PHOTO SHOT] Button.
• When [ON] is selected, the still pictures can be
recorded in approximately 0.5 second intervals
until the [PHOTO SHOT] Button is released or 10
pictures are recorded.
To Stop the RapidFire Consecutive
Photoshot in Progress
Release the [PHOTO SHOT] Button.
Notes:
• One more still picture may be recorded after you
release the [PHOTO SHOT] Button.
• If the Self-timer Function is set, the Camcorder
records up to 10 still pictures continuously.
• Intervals between recording pictures may become
longer depending on the card. We recommend
using a Panasonic SD Memory Card.
• When using the card formatted by other equipment
or a card that was recorded and erased repeatedly,
the intervals between recording pictures may
become longer. If so, back up your important data
on a PC, and format your card with this Camcorder.
28
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
BURST MODE]
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 6 1 0 0

Recording Yourself

You can record yourself while viewing the LCD
Monitor. You can record persons in front of the
camera while presenting them the image. The image
is horizontally flipped as if you see a mirror image.
(The image to be recorded is the same as that
recording.)
• Extend the Viewfinder to see the picture while
recording.
• Set to Tape/Card Recording Mode.
1
Rotate the LCD Monitor towards the lens
side.
• A vertically oriented display appears on the
Viewfinder screen, this is normal and not indicative
of any trouble.
• When the LCD Monitor is rotated towards the
lens side, the One-Touch Navigation icon will not
be displayed even if you press the center of the
Joystick Control.
Recording with the Built-in LED
Video Light
To brighten the natural colors in a scene. Gain Up
mode works with the Built-in Video Light to enhance
the light's brightness.
• Set to Tape/Card Recording Mode.
1
Press the [LIGHT] Button.
• The Built-in LED Video Light lights and the
Gain Up mode is set to on.
• Gain Up mode will be brighter than when only
the Video Light is on, however, washed out
images will appear.
2
Press the [LIGHT] Button.
• Gain Up mode is set to off.
• To eliminate washed out images, use this
mode.
3
Press the [LIGHT] Button.
• The Video Light turns off.
• Pressing the [LIGHT] Button again returns
to .
1
1 2
1 0 0
1
2
3
3
1 0 0 1 0 0