Table of Contents
Advertisement
Preparation
1
Setup
∫ About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6.
≥
This unit has a function to distinguish the batteries that can be used, and the
batteries
(VW-VBG130/VW-VBG260/VW-VBG6)
(The batteries that are not compatible with this function cannot be used.)
≥ To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required.
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not liable
for any accident or failure occurring as a result of use of a counterfeit battery pack.
To ensure that safe products are used we would recommend that a genuine
Panasonic battery pack is used.
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery before
using this unit for the first time.
Important:
If the DC cable is connected to the AC adaptor, then the battery will not charge.
Remove the DC cable from the AC adaptor.
1
Connect the AC cable to the AC adaptor and the AC outlet.
2
Insert the battery into the AC adaptor by aligning the arrows.
22
VQT2M75
Power supply
that are compatible with this function.
Charging lamp
[CHARGE] A
Lights up:
Charging (Battery charging time: l 24)
Goes off:
Charging completed
Flashing:
Be sure to connect the unit
correctly. (l 143)
Advertisement
Table of Contents
