Format Media - Panasonic HDC-TM700K Operating Instructions Manual

High definition video camera
Hide thumbs Also See for HDC-TM700K:
Table of Contents

Advertisement

[FORMAT MEDIA]

Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 109, 117)
1
Touch [FORMAT MEDIA].
2
Touch [SD CARD] or
[Built-inMemory].
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/
transferred. (l 144)
≥ Perform a physical formatting of the built-in memory/HDD when this unit is to be disposed/
transferred. (l 142)
≥ Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
Use this unit to format media.
Formatting built-in memory or HDD is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may
not be used on this unit.
[MEDIA STATUS]
The amount of space left on the SD card, the built-in memory and HDD can be checked.
(Only when the mode is at the
≥ Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the
display for the built-in memory/HDD.
≥ Touch [EXIT] or press the MENU button to close the indication.
≥ The SD card, built-in memory or built-in HDD requires some space to store information and
manage system files, so the actual usable space is slightly less than the indicated value.
The usable built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000
bytes. The capacities of this unit, PCs and software are expressed as
1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the
capacity appears to be smaller.
[CALIBRATION]
Perform the touch screen calibration if a different object to the one touched is selected.
1
Touch [
CALIBRATION
≥ Touch [ENTER].
2
Touch the [_] that appears on the screen with the supplied stylus pen.
≥ Touch [_] in sequence (up left # down left # down right # up right # center).
3
Touch [ENTER].
≥ Calibration cannot be performed when the LCD monitor is turned 180o.
position)
].
Touch [SD CARD] or [HDD].
51
VQT2M75

Advertisement

Table of Contents
loading

Table of Contents