Connecting To The Ac Outlet - Panasonic HDC-SD5BNDL Operating Instructions Manual

Setup

Connecting to the AC outlet

1
Connect the AC cable to the AC
adaptor and the AC outlet.
2
Connect the DC cable to the AC
adaptor.
3
While sliding the SD CARD/
BATTERY OPEN lever A, move
the SD card/battery cover and
open it.
4
Open the battery cable cover.
5
Attach the DC cable.
30
VQT1H62
B Push the center until it locks.
6
≥ Securely close it until it clicks.
≥ Pass the DC cable through the SD card/battery
A
1
≥ Do not use the AC cable with any other
2
ª About the battery pack holder kit
If using the battery pack holder kit, open the
battery cable cover on this unit and then pass the
DC cable for the battery pack holder kit through
the SD card/battery cover.
≥ Read the operating instructions of the battery
≥ If you are not attaching the DC cable for use,
≥ While the DC cable is connected to the AC
Close the SD card/battery cover.
cover as shown in the illustration.
equipment as it is designed only for this unit.
Do not use the AC cable from other equipment
with this unit.
(VW-VH04; optional)
pack holder kit for details on how to use it.
close the battery cable cover.
adaptor, the battery will not charge.
B