Installing The Fiber Optic Module; Description - Bosch VG4 Series Installation Manual

Fiber Optic Media Converter
2

Installing the Fiber Optic Module

This guide provides instructions for installing the Bosch VG4-
SFPSCKT Fiber Optic module into a VG4-A-PA1, VG4-A-PA2,
VG4-A-PSU1 or a VG4-A-PSU2 AutoDome power supply box.
2.1

Description

The VG4-SFPSCKT is a unique media converter module for use
with VG4 series AutoDomes incorporating the Ethernet (TCP/
IP) Communications Module. This media converter module is
designed to accept any of the 10/100 Mbps Small Form-factor
Pluggable (SFP) modules described below.
The media converter module along with the SFP module is user
installed directly into the AutoDome's power supply box to
provide an integrated fiber optic solution.
The Fiber Optic module accepts the following SFP modules:
Sub-module
SFP-2
SFP-3
SFP-23
SFP-24
SFP-25
SFP-26
NOTICE! The SFP module is not included with the VG4-
i
SFPSCKT kit, it must be purchased separately.
Bosch Security Systems, Inc.
All manuals and user guides at all-guides.com
Fiber Type
MMF
SMF
SMF
SMF
MMF
MMF
Installation Guide
Installing the Fiber Optic Module | en
Optical Interface
Duplex LC
Duplex LC
Single SC
Single SC
Single SC
Single SC
F.01U.134.924 | 1.0 | 2009.09
5