Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gorenje WT72122
Summary of Contents for Gorenje WT72122
- Page 1 INSTRUCTIONS FOR USE WASHING MACHINE www.gorenje.com...
-
Page 3: Intended Use
INTENDED USE This washing machine is exclusively destined to wash • Keep these Instructions for Use and the and spin machine washable laundry in quantities Programme Chart; if you pass on the washing which are usual for private households. machine to another person, also give him/her •... -
Page 4: Before Using The Washing Machine
5. EC Declaration of Conformity The Manufacturer is not liable for any damage to laundry resulting from inadequate or incorrect fabric • This washing machine has been designed, care instructions which have been provided with the constructed and distributed in compliance garment or article. -
Page 5: Description Of The Washing Machine
DESCRIPTION OF THE WASHING MACHINE (picture 1) a. Lid e. After-Sales Service sticker (behind the filter cover) b. Detergent dispenser f. Mobility lever (depending on model). To move the washing machine: pull the handle out a little bit by c. Drum hand and pull it out to the stop with the foot. -
Page 6: Electrical Connection
ELECTRICAL CONNECTION Do not use extension leads or multi sockets. Electrical connections must be made in accordance with local regulations. 1) Warning - this washing machine must be earthed This washing machine is normally supplied with a mains lead having a plug fitted in the factory which has been checked for correct earth continuity. -
Page 7: Before The First Wash Cycle
BEFORE THE FIRST WASH CYCLE To remove any residual water used in testing by the 1/3 of the quantity the detergent manufacturer manufacturer, we recommend that you carry out a recommends for lightly soiled laundry) to the main short wash cycle without laundry. wash chamber of the detergent dispenser. -
Page 8: Detergents And Additives
DETERGENTS AND ADDITIVES Keep detergents and additives in a safe, dry Please note: place out of the reach of children. Too much detergent can result in excess foam Do not use any solvents (e.g. turpentine, formation, which reduces washing efficiency. If the benzene);... -
Page 9: Cleaning The Filter/ Draining Residual Water
CLEANING THE FILTER/ DRAINING RESIDUAL WATER The washing machine is provided with a self-cleaning water starts to flow out; do not remove it as yet. pump. The filter keeps objects like buttons, coins, 5. Wait until all the water has drained. safetypins etc. -
Page 10: Transport And Handling
Water inlet hose(s) 3. Close the drum flaps and turn the drum a half-turn (picture 25). • Check the hose regularly for brittleness and cracks. 4. Using a screw-driver, press on the plastic end while Replace if necessary. sliding the blade from left to right (picture 26, 27). Filter 5. -
Page 11: Troubleshooting Guide
TROUBLESHOOTING GUIDE Your washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and allow you to react appropriately. These faults are frequently so minor that they can be removed within a few minutes. Problem Causes - Solutions - Tips •... - Page 12 Description of failure indicators Failure indicator Indication on display Description - Causes - Solutions lights up (if available) “bdd” Appliance stops during the programme. “Drum flaps (in case your washing open” (the drum flaps have not been closed properly). Push the “Reset” button for at least 3 seconds and wait machine has no display: all lamps of the until the “Door open”...
- Page 15 DT350 W10761910 06/2017...
- Page 16 PROGRAMME CHART A. Programme selector This washing machine is equipped with automatic safety functions which detect and B. Time display diagnose faults at an early stage and react appropriately: C. “Start delay” button D. “Spin” button I. “Service” indication E. “Start/Pause” button J.
- Page 17 Terminate the “Rinse Hold” option: CONSUMPTION DATA “LID OPEN” INDICATION Power consumption in off-mode 0.11 W / in left-on mode 0.11 W • Press the “Start/Pause” button; the programme Tempe- Load Water Energy Before starting and after end of a programme, the lamp Approx.
Need help?
Do you have a question about the WT72122 and is the answer not in the manual?
Questions and answers