Sony XPERIA ACE II Instruction Manual page 208

By ntt docomo
Table of Contents

Advertisement

Data management
Phenomenon
Data transfer is
Check if USB hub is used. If you use
not performed
USB hub, operations may not be
performed correctly.
Data saved in
Remove and install the microSD card.
microSD card
P.35
is not
displayed
Images are not
When image data is broken, it cannot
shown
be displayed correctly, for example, a
correctly.
black screen appears.
Bluetooth function
Phenomenon
The terminal
Allow Bluetooth device (commercially
cannot be
available) to be detectable and then
connected to
make pairing with the device on the
a Bluetooth
terminal. If you want to cancel a
device/A
paired device and then make the pair
Bluetooth
setting again, cancel the pair settings
device cannot
on both the terminal and the
be found by
Bluetooth device (commercially
search
available).
Calls cannot
If calls are made several times when
be made from
the other party does not answer or is
the terminal
out of service, the call to this number
when it is
may be disabled. In this case, turn
connected to
terminal off and on.
an external
device such as
car navigation
or handsfree
device
Cause and handling
Cause and handling
P.186
External device connection
Phenomenon
An external
Reconnect the external device.
device which
However, some devices may not be
detected.
is connected
When moisture is detected on the
via USB cable
USB Type-C jack, automatic
A to C cable
detection of USB device is disabled
etc. is not
and an external device cannot be
recognized
recognized.
Check that any water droplet is not
on the USB Type-C jack, connect the
USB device, and then tap the
displayed message.
Cause and handling
Appendix
206

Advertisement

Table of Contents
loading

This manual is also suitable for:

So-41b

Table of Contents