Table of Contents
Advertisement
Charging
■
Phenomenon
Cannot charge
Check if the adapter's power plug is
･
(The
correctly inserted to a power outlet
notification
or accessory socket.
LED does not
Check if the adapter and the
･
turn on, or the
terminal are set correctly.
icon does not
When using an AC adapter
･
indicate
(optional), check if the Type-C plug
charging
of the AC adapter is connected to
status)
the terminal correctly.
When using the USB cable A to C 02
･
(optional), check if a PC is turned
on.
If you execute calls,
･
communications or other function
operations for a long time while
charging, the terminal may become
hot and the notification LED turns
off (charging stops) or battery level
may become low. In this case, wait
until the temperature of the
terminal drops and charge again.
The
When the battery level is low, charge
notification
the battery.
LED blinks in
red and the
terminal
cannot be
operated
Cause and handling
P.39
→
P.39
→
P.37
→
Phenomenon
Battery Care
For setting of Auto, Battery Care
charging does
charging does not start unless the
not start
learning is complete from finding
regularity in your charging habit.
When Custom is set, charging can be
started at the specified time zone.
P.38
Cannot charge
If you remove charging equipment
fully
during Battery Care charging, the
terminal may not be fully charged.
To charge fully, switch to regular
charging.
Cause and handling
P.38
→
Appendix
→
200
Advertisement
Table of Contents
