Table of Contents
Advertisement
Enabling USB tethering
Connect the terminal to a PC with
1
USB cable A to C 02 (optional) etc.
(P.40).
When a screen for requesting access to
･
the device data appears, tap [DENY].
When a screen for installing driver
･
software appears, wait for a while until
the installation is complete.
When a confirmation screen of
･
installing software appears on the
terminal, tap [SKIP].
From the Home screen,
2
u
[Settings]
[Network & internet]
[Hotspot & tethering].
of "USB tethering".
3
If the installation screen for the
･
terminal's driver software appears on
your PC, please wait a moment for the
installation to complete.
❖ Information
System requirements (OS) for USB tethering are as
･
follows.
- Microsoft Windows 10
- Microsoft Windows 8.1
In USB tethering, you cannot access your terminal's
･
internal storage or microSD card from the PC.
Enabling Bluetooth tethering
Up to 4 Bluetooth devices can be connected
to the Internet.
From the Home screen,
1
[Settings]
[Hotspot & tethering].
2
❖ Information
To connect the terminal from a Bluetooth device,
･
perform pairing (P.186) and then set the connection
method for connecting the terminal. For operation
on a Bluetooth device, refer to the manuals of the
u
Bluetooth device.
u
u
[Network & internet]
of "Bluetooth tethering".
u
u
Settings
154
Advertisement
Table of Contents
