Operation Guide; Control Panel Operation; Leds Behavior; Feed Key Operation - Tally Dascom DL-210 User Manual

Tally Dascom DL-210

3 OPERATION GUIDE

3.1 Control Panel Operation

3.1.1 LEDs Behavior

LEDs
Power
Status
Error

3.1.2 Feed Key Operation

Feed Paper
•
Under ESC/POS mode, presses Feed Key once, feed paper one line (30 steps);
Under ESC/POS mode, hold down Feed Key without release, feed paper continuously;
Under ZPL/EPL mode, press Feed Key once, feed one piece of label;
Under ZPL/EPL mode, hold down Feed Key without release, feed labels continuously.
Hexadecimal dump
•
Hold down Feed Key and switch on printer till Power LED blinks three times, buzzer beeps three
times.
When self-test is OK but on-line printing error occurs, you can check the
communication between PC and program via Hexadecimal Dump mode. In
Hexadecimal Dump mode, the printer will print out hexadecimal data once it
receives the signal from host. You can ask technical service for analysis.
LEDs' behavior
On ○
Off ●
On ○
Off ●
Fast blink ○●○●○●○
Slow blink ○●●○●●○
On ○
Off ●
Fast blink ○●○●○●○
Status
Power on.
Error or power off.
Paper end.
Normal.
Label remains in peeler.
Ribbon end.
Print head mechanism is opened.
Normal.
Print head is over-heated.
28
User Guide V1.2