Tally Dascom DL-210 User Manual page 42

Tally Dascom DL-210
Setup Items Explanation

Setup Items Options
Page Mode On, Off
Label Paper,
Print Media
Continuous Paper
Peeler Off, On
Thermal Transfer,
Print Method
Direct Thermal
Print Density 1, 2, 3, 4, 5
Printer Language English, Chinese
ESC/POS, ZPL,
Emulation
EPL
Print Speed 1, 2, 3, 4
Black Mark
On, Off
Detection
Black Mark to
User-define
Home
Black Mark to
User-define
Cutter
Default Description
Use un-continuous paper select on; Use continuous
On
paper select off.
Label
Select the actual media type.
Paper
Off Enable peeler or not
Thermal Use ribbon select thermal transfer; Use thermal
Transfer paper select direct thermal
Adjust print density. Level 1 is lowest, Level 5 is
1
highest.
Set the printer's system language, Chinese or
English
English.
Select ZPL/EPL while using un-continuous paper;
ZPL
Select ESC/POS while using continuous paper.
Adjust the print speed. Level 1 is lowest, Level 4 is
4
highest.
Off Enable black mark detection or not.
Set the vertical distance between print home
20
position and the top of black mark.
Set the vertical distance between cutting position
40
and the top of black mark.
30
User Guide V1.2