Problem
The DVD player does not start playback.
Picture freezes momentarily during playback.
Unable to select Progressive Scan on/ off.
When the following messages on the unit's
display.
(LOAD)
(STOP)
(OPEN)
(TITLE)
Troubleshooting
Solution
–
Insert a readable disc with the playback side
facing down.
–
Check the disc type, color system (PAL/NTSC)
and region code.
–
Check for any scratches or smudges on the disc.
–
Press SETUP to turn off the setup menu screen.
–
You may need to enter the password in order to
change the parental rating level or to unlock the
disc for playback.
–
Moisture may have condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
–
Disconnect the power cord from the power outlet
for a few minutes. Reconnect the power cord and
try to operate again as usual.
–
Check the disc for fi ngerprint/scratches and clean
with a soft cloth wiping from center to edge.
–
Check that the output of the video signal is turn to
{Progressive}.
–
Loading the disc. Wait a moment.
–
Stopping the playback. Press PLAY/PAUSE q/h.
–
Insert a readable disc with the playback side
facing down.
Press OPEN/CLOSE ; to close the tray.
–
–
Press e r w q to select the title, then press OK.
31
31