Canon Power Shot A400 User Manual page 49

Make the brightness in each image
consistent. The final image will appear
unnatural if the difference in brightness
is too great.
Pan (swivel) the camera to take
successive shots.
To shoot close-ups, slide the camera
over the subject, keeping it parallel to
the subject as you move.
Shooting
1
Set the mode switch to
2
Select or
menu.
See Selecting a Shooting Mode (p. 35).
3
Shoot the first image.
The exposure and white balance settings are
set and locked with the first image.
.
from the
4
Compose and
shoot the second
image so that it
overlaps the first.
Minor discrepancies in
the overlap can be
corrected with the
software.
An image can be retaken. Press
return to that frame.
5
Use the same procedures to
shoot the remaining frames.
A maximum of 26 images can be recorded
either horizontally or vertically.
6
Press the SET button after the
last shot.
Shooting – The Basics
Sequence
or to
47