Canon Power Shot A400 User Manual page 115

Corrupted data
RAW
Unidentified Image
Cannot magnify!
Cannot rotate!
Incompatible WAVE
format
Cannot register this
image!
Protected!
Too many marks!
Cannot mark image
Exx
You attempted to play back an image with corrupted data.
You attempted to play back an image recorded in the RAW format.
You attempted to play back an image that was recorded in a special format
(proprietary format used by the camera of another manufacturer) or a movie
that was taken with another camera.
You attempted to magnify an image which was photographed with another
camera, recorded in a different format, or edited on a computer or a movie
clip.
You attempted to rotate an image which was photographed with another
camera, recorded in a different format, or edited on a computer or a movie
clip.
A sound memo cannot be added to this image since the format of the existing
sound memo is incorrect.
You attempted to register an image recorded with another camera or a movie
clip as a start-up image.
You attempted to erase protected image or movie clip.
Too many images have been marked for printing or transferring. Cannot
process any more.
You attempted to set the print settings for a non-JPEG file.
Camera malfunctioned. Turn off the power and turn on again, then re-shoot or
play back. If the same message recurs frequently, the camera may be
damaged. Note down the error number [xx] and take the camera to a
Customer Support Help Desk. If this message appears immediately after you
have taken a shot, the camera may not have shot the image. Switch to the
Playback mode and check whether the image was actually recorded.
List of Messages
113