Canon Power Shot A400 User Manual page 31

Canon digital camera user guide power shot a400
Table of Contents

Advertisement

In addition to the above, the histogram and recorded
movie time are displayed.
The following information may be displayed, depending on
the image.
An audio file other than a wave file, or a file with
unrecognized format is attached.
A JPEG file not supported by "Design Rule for
Camera File System" standards.
RAW file format
Unrecognizable file formats
Shooting Mode
p. 35, 48
Exposure Compensation
p. 76
White Balance
p. 77
ISO Speed
p. 79
Photo Effect
p. 80
Resolution (Movie)
p. 37
Flash
p. 39
Light Metering Mode
p. 75
Macro/Infinity
p. 42
The image in the LCD monitor may
darken when the monitor is used under
sunlight or other strong lighting. This is
not a defect.
The on/off setting of the LCD monitor
display mode is memorized when the
camera is turned off. When the camera is
turned on again it assumes the last
mode. However, when the LCD monitor is
turned on and the "Change the batteries"
message appears, the LCD monitor may
not automatically turn on the next time
the camera is started.
While a recorded image is displayed on
the LCD monitor, you can check the
exposure with the graph (See About the
Histogram). It shows the distribution of
the brightness data. If the exposure
requires adjustment, set the exposure
compensation and re-shoot (Press the
button if the histogram and other
information is not shown.).
Please note that image information
recorded by this camera may not display
correctly on other cameras and image
information recorded by other cameras
may not display correctly on this camera.
Basic Functions
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A400 - powershot 3.2mp digital cameraPowershot a400

Table of Contents