Camera Care And Maintenance - Canon Power Shot A400 User Manual

Camera Care and Maintenance

Use the following procedures to clean the
camera body, lens, viewfinder, LCD monitor
and other parts.
Camera Wipe the camera body with a soft
cloth or eyeglass lens wiper.
Body
Lens First use a lens blower brush to
remove dust and dirt, then remove
any remaining dirt wiping the lens
lightly with a soft cloth.
Never use synthetic cleaners on
the camera body or lens. If dirt
remains, contact the closest
Canon Customer Support Help
Desk as listed on the separate
Canon Customer Support leaflet.
LCD Use a lens blower brush to remove
dust and dirt. If necessary gently
Monitor,
wipe the viewfinder and LCD
Viewfinder
monitor with a soft cloth or an
eyeglass lens wiper to remove
stubborn dirt.
Never rub or press forcefully on
the LCD monitor. These actions
may damage it or lead to other
problems.
Never use water, paint thinner, benzene, or
detergents to clean the camera, as these
may cause damage or deformation.
Appendix
125