Advertisement
WarmWatch®
Temperature Reader
• Know the temperature of every
injection fluid bag
• Measure the temperature of
individual bags before administering
injection fluid to patients
• WarmWatch is fully integrated into
the fluid warmer control
• Temperature range:
» 32°C-40°C (90°F-104°F)
• View the individual bag surface
temperature while the bag is inside
the fluid warming compartment
• The temperature is displayed within
seconds after the touch of a button
on the fluid warmer control
• Curved, lightweight base cradles
bags up to 3 liters in size
www.enthermics.com
Advertisement
Table of Contents
Related Manuals for Enthermics WarmWatch
Summary of Contents for Enthermics WarmWatch
- Page 1 • Know the temperature of every injection fluid bag • Measure the temperature of individual bags before administering injection fluid to patients • WarmWatch is fully integrated into the fluid warmer control • Temperature range: » 32°C-40°C (90°F-104°F) • View the individual bag surface...
- Page 2 Table of Contents Delivery Transportation Damage and Claims Unpacking Installation Operation Instructions Cleaning Limited Warranty Authorized Representative: MDSS GmbH Schi graben 41 30175 Hannover Germany MN-38787 • Rev 0 • 05/17 • WarmWatch® Temperature Reader...
- Page 3 3. Note all damage to packages directly on the carrier’s delivery receipt. MN-38787 • Rev 0 • 05/17 • WarmWatch® Temperature Reader...
- Page 4 Item Description Part WarmWatch® Temperature Reader 5022195 with Coil Cord Coil Cord CD-38660 Part numbers and drawings are subject to change without notice. MN-38787 • Rev 0 • 05/17 • WarmWatch® Temperature Reader...
- Page 5 8. Place the temperature reader inside the fluid chamber with the base positioned flat on the fluid shelf. 9. Attach the operation label next to the fluid chamber Temperature Recall button. MN-38787 • Rev 0 • 05/17 • WarmWatch® Temperature Reader...
- Page 6 7. Release the Up Arrow and Down Arrow set-point. buttons. The WarmWatch Temperature Reader self-calibrates. The fl uid chamber set injection temperature is displayed. MN-38787 • Rev 0 • 05/17 • WarmWatch® Temperature Reader...
- Page 7 NOTICE: Always follow appropriate state or local health metal to avoid surface scratches. Avoid using cleaning (hygiene) regulations regarding all applicable materials with sharp edges. cleaning and sanitation requirements. MN-38787 • Rev 0 • 05/17 • WarmWatch® Temperature Reader...
- Page 8 Limited Warranty Enthermics Medical Systems warrants to the original purchaser that any original part that is found to be defective in material or workmanship will, at our option, subject to provisions hereinafter stated, be replaced with a new or rebuilt part.
Need help?
Do you have a question about the WarmWatch and is the answer not in the manual?
Questions and answers