Supra CHLOE Installation Instructions And User Manual page 12

Wood burning stove
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
2. INSTALLATION
DEFINITION
Wood burning stove designed for installation close to a wall and be
moved with no need for additional work. The connection to the flue
pipe is made through stainless steel or vitreous enamel pipes with
the CE mark. An individual flue pipe must be used.
SAFETY CLEARANCE
Comply with the safety clearances indicated between the wall and
the sides or the back of the appliance. If the wall is non-
combustible, then the safety clearance does not apply. Regardless
of the orientation of the stove, there must be a clearance of 2 m
between the glass and the wall or any flammable material.
100 mm min.
3XD min
POSITIONING THE STOVE
Open the stove door (Chloe stove) to remove the screws securing
it to the pallet. Install the appliance on a floor with sufficient load-
bearing capacity. If the floor cannot support the load, then
measures should first be taken (for example, the installation of a
load distribution plate). Position the stove in its definitive location.
For ease of maintenance, it is recommended to lay tiles or some
other type of covering in the load-bearing area.
Before operating the stove, the baffle plate should be installed and
removed a number of times in order to become familiar with its
operation.
MOUNTING THE BAFFLE PLATE
The baffle is an important element for the improved efficiency of
the appliance, facilitating the recovery of the soot during sweeping.
The baffle is installed when the appliance is delivered. Before
operating the stove, the baffle plate should be installed and
removed a number of times in order to become familiar with its
operation.
1.
Remove the right side panels (1;2).
2.
Lift up and remove the vermiculite baffle plate (6).
3.
Remove the left side panels (5;4).
4.
Remove the back panel (3).
300 mm min.
5.
Push the steel baffle plate (6) backwards and remove it.
Reinstall the baffle plate (6'; 6) and the panels (1 to 5) in
6.
reverse order to removal. Be careful to install the panels in the
correct direction (front/back).
WARNING! The door closes automatically!
4
5
4
5
10
11
13
6'
6
3
1
6
3
2
9
8
12
1
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Chloe pedestal

Table of Contents