Table of Contents
Advertisement
Quick Links
RCS Saverne B 675 880 710 - SIRET 675 880 710 0032
BP 22 - 67216 OBERNAI Cedex- FRANCE
INSTRUCTIONS FOR INSTALLATION AND USE
This appliance has been designed with care. To get the best out of it, as you are entitled to expect, and for your safety, please read carefully
these instructions for installation and use before starting work on the installation. The appliance must be connected using suitable fittings (2)
to an individual smoke flue specific to this appliance. A number of accessories are also available (2) , some of which must be fitted before
installation.
1. Technical characteristics and dimensions
2. Preparation of the existing site
3. Assembly and connection
4. The fireplace and the hood
5. Use
6. Maintenance
7. After-sales service
148C
162C
Illustrations non-contractual.
We recommend the HOMY range of products: a complete range of suitable connections and accessories. Documentation on request from your dealer.
(2)
FR-DTU 24.1 dealing with smoke flues, FR-DTU.24.2 dealing with chimneys equipped with a closed fire; NF EN 13229 Open fires and inserts burning solid fuel. (available
(3)
from the AFNOR
).
www.supra.fr
IMPORTANT
150C
168C
GB 1/16
CLOSED FIRE
148C / 150C / 152C
11-08
152C
163VL
162C / 168C / 163
25254
2
4
6
12
13
15
15
25254-11-08
Advertisement
Table of Contents
Related Manuals for Supra 148C
Summary of Contents for Supra 148C
- Page 1 CLOSED FIRE 148C / 150C / 152C RCS Saverne B 675 880 710 - SIRET 675 880 710 0032 BP 22 - 67216 OBERNAI Cedex- FRANCE 162C / 168C / 163 www.supra.fr INSTRUCTIONS FOR INSTALLATION AND USE 11-08 25254 IMPORTANT This appliance has been designed with care.
-
Page 2: Important Assembly Information
To avoid all these problems, there is only one solution. Have your chimney’s draught checked (with the fire in operation) by a professional and if it is over 20 Pa, install a draught regulator on the fire’s connection pipe. 148C 168C Ø200... -
Page 3: Technical Characteristics
1. TECHNICAL CHARACTERISTICS AND DIMENSIONS 1. TECHNICAL CHARACTERISTICS AND DIMENSIONS Fire place 148C 150C 152C 162C 168C 163 VL Classification of the fire Continuous Continuous Continuous Intermittent Intermittent Intermittent Rated power output 13 kW 13 kW 13 kW 11 kW... - Page 4 152C 162C Ø150 Ø200 Ø150 Ø200 150C 163 VL Ø200 Ø150 Ø200 REMARK REMARK FOR THE FIRES IN THIS RANGE YOU WILL NEED FOR THE FIRES IN THIS RANGE YOU WILL NEED FIREPLACE OPENING WITH FIREPLACE OPENING WITH HEIGHT OF 600 MM. HEIGHT OF 600 MM.
- Page 5 2. PREP TION OF THE EXISTING SITE 2. PREP TION OF THE EXISTING SITE In all cases refer to the current legal requirements. If the smoke flue already exists; it is essential to: - have it swept by mechanical means (flue brush), All combustible materials or materials liable to be affected by the tempe- - have the physical state of the chimney checked by a qualified profes- rature must be removed from the surface, or interior of the floors, walls,...
- Page 6 16 cm Supporting wall (class M0 materials) Stone cladding (optional) Wooden beam (depending on model of fireplace) Decorative hood (optional) Curtain (material according to model) Chimney block (minimum cross section 400 cm²) Connecting collar (not supplied) Connecting pipe (not supplied) Insulated box Warm air outlet grille Firebox...
-
Page 7: Tools Required
Allen keys. Content of bags of screws delivered with different fires Bag of screws N° Description 148C 150C 152C 162C 168C Assembly of stand. Screw H M 6 x 20 Fixing stand onto the fire. Screw CHC M 6 x 20 Fixing of the struts. -
Page 8: Unpacking The Fire
Screws to use Assembly of the warm air distribution box Reminder The warm air distributor makes it possible to channel the warm air into See leaflet DA 148C. 148C optional neighbouring rooms or upstairs. Connect each nozzle to a closable grille... - Page 9 Fixing of the warm air distribution cover Reminder 148C optional See leaflet DA 148C. 150C optional See leaflet CDA 150C. 152C supplied mounted 162C supplied mounted 168C optional See leaflet DA 168C. supplied mounted 7. Fixing the warm air distribution nozzles and plugs 3.7.1...
- Page 10 Fasten the fixed frame at the front of the fire, on the counter- 3.8.3 frame using 2 wide washers (M) and 2 sheet metal screws no. 14 (H). Remove the side screws, which will no longer be used NB. The fixed frame must be perfectly positioned so that the door can be raised unhindered.
- Page 11 10 Installation of the top stoppers (fires with lift-up doors) 3.10.1 The top stoppers allow the door to be blocked in its top position. Put the top stoppers in place on each of the 2 fixed frame uprights. These stoppers consist of a screw (C) and a split nut (J) to be pla- ced as indicated in the figure opposite.
- Page 12 For optimum operation, the position given must be used. Before sweeping the chimney, remove the baffle placed in the top of the appliance. Fires 148C / 150C / 152C Fires 162C / 168C / 163 Introduce the smoke baffle into the upper part of the fire by tilting Introduce the baffle into the fire by tilting it.
- Page 13 4. THE FIREPLACE AND HOOD 4. THE FIREPLACE AND HOOD Apart from their aesthetic function, the fireplace and hood that surround the 4.3. The hood firebox also constitute a thermal chamber inside which the heat exchanges We recommend the use of M0 class materials (cf. FR-DTU) (4) as well as the take place.
- Page 14 Combustion control adjustment lever Lifting handles 148C / 150C / 152C 162C / 168C / 163 TO AVOID ANY RISK OF BURNS WHEN USING THE APPLIANCE, IT IS ESSENTIAL THAT THE COLD HANDLE ALWAYS BE USED WHEN MANIPULATING THE DIFFERENT CONTROLS.
-
Page 15: Operation
• Wood load To reach the rated burning speed, the load required is 3 logs representing 12 to 13 kg of firewood 148C / 150C / 152C 162C / 168C Table 5.1: Adjustment of the closed fire... -
Page 16: Maintenance
After each heating season, clean the fire completely and check that all the moving parts of the appliance are working properly. RCS Saverne B 675 880 710 - SIRET 675 880 710 0032 BP 22 - 67216 OBERNAI Cedex- FRANCE www.supra.fr GB 16/16 25254-11-08...