Table of Contents
Advertisement
18
www.electrolux.com
6.5 At the end of the program
Changing a running program is possible
only by resetting it.
The appliance stops automatically.
•
The acoustic signal will operate.
•
The display shows " End "
•
The indicator "
•
The indicators "
•
come on.
The Start/Pause indicator is on.
•
The appliance continues to operate with
the anticrease phase for approximately
1 hour or more if Extra Anticrease option
was set (see chapter Option - Extra
Anticrease ).
The anti-crease phase reduces
creasing. You can remove the laun-
dry before the anti-crease phase
is completed. We recommend, for
better results, that you remove the
laundry when the phase is almost
completed.
Always clean the filter when a
program is completed.
" is on.
" filter may
6.6 Stand-by function
To reduce energy consumption, this
function automatically deactivates the
appliance:
After 5 minutes if you do not start
•
the program.
After 5 minutes from the end of
•
the program.
Advertisement
Table of Contents
