AEG BPK842220M User Manual page 34

34 www.aeg.com
1
Install the shelf supports in the opposite
sequence.
11.3 Pyrolytic cleaning
CAUTION!
Remove all accessories
except for the shelf supports
and telescopic runners.
The pyrolytic cleaning
procedure cannot start:
• if you did not remove the core
temperature sensor plug from the
socket.
• if you did not fully close the oven
door.
Remove the worst dirt manually.
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them at
the same time as the
function: Pyrolytic Cleaning.
It can cause damage to the
appliance.
1. Clean the inner side of the door with
hot water, so that the residues do not
burn from the hot air.
2. Turn the appliance on.
3. Select the Menu and press the rotary
knob to confirm.
4. Select Pyrolytic Cleaning and press
the rotary knob to confirm.
5. Select the duration of the cleaning
procedure:
Option
Quick
2
Description
1 h for a low
degree of dirt
Normal
Intense
6. Press the rotary knob to confirm.
When the pyrolytic cleaning
starts, the appliance door is
locked and the lamp does
not work. The cooling fan
works at a higher speed.
To stop the pyrolytic
cleaning before it is
completed, turn the
appliance off.
WARNING!
After the function is
completed, the appliance is
very hot. Let it cool down.
There is a risk of burns.
After the function is
completed, the door stays
locked for the cool down
phase. Some of the
appliance functions are not
available during the cool
down phase.
11.4 Cleaning Reminder
When reminder is displayed cleaning is
necessary. Perform the function Pyrolytic
Cleaning.
11.5 Removing and installing
the door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
Be careful when you remove
the door from the appliance.
The door is heavy.
1. Open the door fully.
2. Fully lift up the clamping levers (A) on
the two door hinges.
1 h 30 min for
a usual de-
gree of dirt
3 h for a high
degree of dirt