Qomo HiteVision QRF 900 User Manual page 15

 Exit – exit the current quiz session
 F1 –Controls the Register/Answering Status Bar size, by continuing to press the
button you will cycle the size from large to small and then it will disappear.
F2 –Controls the Register/Answering Status Bar position, by continuing to press the

button you will cycle the position from top, left and right.
 Report/ Result
to session 2.1.1.7 Result and Report.
Note: All of these control buttons are duplicated and displayed on the instructor's remote keypad.
2. The Question Answer Timer:
 The timeout value is selected for each question during the quiz file set up.
 The timer box background colors and functions are: Black: Stop; Green: Running; Yellow:
Pause.
 The left up/down button will reset the Minutes
left side of the timer box to increase or decrease the Minute's.
 The right up/down button will reset the Seconds
the right side of the timer box to increase or decrease the Second's.
3. Quiz Status:
 Activity Mode: Indicates the current activity you have selected.
 Hand Raise: Indicates the number of students who use the raise hand function in their
keypad.
Answered/Total: Indicates the ratio of the number of people who answer the question to the

total number of people who have logged in.
 Question Done: When the question is finished, the sign ―Done‖ will display.
 Question No: Indicates the current question number.
 Page/Total: The current page number of the total pages.
To begin gathering responses from the students, click the Start/Pause
instructor remote keypad press the play\button. The register number corresponding to each
individual clicker logged in will appear on the top of the screen.
The countdown timer will display the remaining time in minute(s) and seconds. The timer value may
be increased or decreased by pressing the up/down button before or during the question test. Once
the timer is at 0, the receiver will no longer receive audience/participant responses. The timer
window will change to black. The instructor can always stop the timer by pressing the Start/Pause
Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
/ Displays the instant report and result.(If desired) Refer
www.qomo.com
Press the up or down button on the
Press the up or down button on
button or using the
15