Qomo HiteVision QRF 900 User Manual page 129

6 The quiz is loaded and
ready but the timer
has not started. The
student
previously
this test.
The quiz is loaded and
7
ready but the timer
has not started.
The quiz is loaded and
8
running,
started. The student
keypad
class previously.
9 The quiz is loaded and
running and the timer
started.
Note: Before using your student keypad to join a quiz with the pace controlled by the instructor, you
should understand the function operation from using this table.
To join a quiz, follow these steps:
a) Turn on the keypad power. If the scenario is in form 5 or 8, you just need to press the ―Send‖
key .
b) If you did not join the class previously, you may have to login to the current class and register
for the class.
c) If you joined the current class previously, you may simply press the ―Send" key
short cut to directly register for the class.
d) If your keypad ID is not listed in the current class, you may need to set your keypad ID to the
one listed in the class, or try to force a login. The instructor will choose to allow the
participation of a non-registered student.
e) After you registered for the class, follow the instructor's quiz pace.

Attending a quiz with self-controlled pace
Note: Before using your student keypad to join a quiz in the self-controlled pace, you should
understand the function operation forms on the above table before you can begin your quiz.
To join the quiz, follow these steps:
Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
Yes
keypad not
used for
Yes
Yes
the timer
joined the
Yes
www.qomo.com
Power No Host Display, need to
Up login to the class and
register.
Enter Receives the message
and
―Wait to Start‖
send the
answer
Power You can press ―Send‖
Up
key to directly logon
back to previous class.
The LCD displays the
register screen.
Enter Displays
and message.
send the
answer
―Success!‖
to get a
129