Silence Function; Fp Function - Rotenso SETU User Manual

7.4.2. GEAR operation:
Press the ECO/GEAR button to enter the GEAR operation as following:
Under GEAR operation, the display on the remote controller will alternage between electical energy
consumption and set temperature.

7.5. Silence function

2s

7.6. FP function

To activate the FP function, start the air conditioner in heating mode, set the lowest available temperature
(16°C/63°F), then press the down arrow button 2 times within one second.
2
If you press any buttons: ON/OFF, Sleep, Mode Fan or up/down button while the FP function is working it will
be canceled.
75% ( up to 75% electrial energy consumption).
50% (up to 50% electrial energy consumption)
Previous setting mode
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function (some units).
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Press ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
The unit will operate at high fan speed (while compressor on) with temperature
automatically set to 8°C/46°F.
NOTE: This function is for heat pump air conditioner only.
SETU remote control
REMOTE CONTROL SUPPORT
User manual
EN
27