Auto-Tuning The Tv - Sony KDL-19L4000 Operating Instructions Manual

4
F f
Press / to select the country/region in
which you will operate the TV, then press
.
Auto Start-up
Language
Country
Location
Back: Select: Confirm:
If the country/region which you want to use on
the TV does not appear in the list, select "-"
instead of a country/region.
5
F f
Press / to select the location type in
which you will operate the TV, then
press .
Auto Start-up
Language
Country
Location
Back: Select: Confirm:
This option selects the initial picture mode
appropriate for the typical lighting condition in
these environments.

7: Auto-tuning the TV

1
Before you start auto-tuning the TV, insert
a pre-recorded tape into the VCR
connected to the TV (page 5) and start
play back.
The video channel will be located and stored on
the TV during auto-tuning.
If no VCR is connected to the TV, skip this step.
-
United Kingdom
Ireland
Nederland
Luxembourg
France
Italia
Home
Shop
2
Press .
Auto Tuning
Do you want to start Auto Tuning?
Back: Start:
The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, so do not
press any buttons on the TV or remote while
proceeding.
If a message appears for you to confirm the
aerial connection
No digital or analogue channels were found.
Check all the aerial connections and press
start auto-tuning again.
3
When the Programme Sorting menu
appears on the screen, follow the steps of
"Programme Sorting" (page 27).
If you do not change the order in which the
analogue channels are stored on the TV, go to
next step.
4
Press MENU to exit.
The TV has now tuned in all the available
channels.
Detaching the Table-
Top Stand from the TV
~
Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV.
Table-Top
Stand
to
7
GB