Auto-Tuning The Tv - Sony Bravia KDL-40P55 Series Operating Instructions Manual

In Shop mode, some settings will be periodically
reset for Shop usage.
This option selects the initial picture mode
appropriate for the typical lighting condition in
these environments.

7: Auto-tuning the TV

1
Press .
Auto Tuning
Do you want to start Auto Tuning?
Back: Start:
The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, so do not
press any buttons on the TV or remote while
proceeding.
If a message appears for you to confirm the
aerial connection
No digital or analogue channels were found.
Check all the aerial connections and press
start auto-tuning again.
2
When the Programme Sorting menu
appears on the screen, follow the steps of
"Programme Sorting" (page 23).
If you do not change the order in which the
analogue channels are stored on the TV, go to
next step.
3
When the Eco Preset menu appears on
the screen, if you press "Yes," the "Eco"
settings are changed to recommended
values to reduce power consumption.
Eco Preset
Do you want to use the Eco Preset?
Choosing "YES" will reduce power consumption.
Power Saving
Idle TV Standby
PC Power Management
Yes
to
Reduce
3 h
On
No
4
Press MENU to exit.
The TV has now tuned in all the available
channels.
Detaching the Table-
Top Stand from the TV
~
• Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV.
Table-Top
Stand
7
GB