4
F
f
Press
/
to select "Home", then press
Auto-tuning the TV
5
G
g
Press
/
to select "OK", then press
The TV starts searching for all available channels.
This may take some time, please be patient and do
not press any buttons on the TV or remote.
If a message appears for you to confirm the
antenna connection
No programmes found. Please connect antenna
(aerial) and select "Confirm" to start auto-tuning
again. If 100 channels are found, auto-tuning is
stopped.
6
When the "Programme Sorting" menu
appears on the screen, follow the steps of
"Programme Sorting" (page 32).
If you do not change the order in which the channels
are stored on the TV, go to step 7.
7
Press MENU to exit.
The TV has now tuned in all the available channels.
8
Select day and time.
9
Select "Yes" to link the operations of the TV
and the connected equipment that is
compatible with control for HDMI
automatically.
Do you want to enable control for compatible
HDMI devices?
10
G
.
Press
"Display this menu next time?" dialogue,
then press
z • If "Yes" is selected and the TV is turned off
by pressing 1 on the TV, or is disconnected
from the AC power outlet, the initial set-up
procedure restarts the next time the TV is
turned on.
.
g
/
to select the desired setting in
to exit.
7
GB