IBM System x iDataPlex dx360 M4 User Manual page 24

v IBM X-Architecture technology
v IBM ServerGuide Setup and Installation CD
v Integrated network support
v Integrated Trusted Platform Module (TPM)
v Large data-storage capacity and hot-swap capability
v Active Energy Manager
8
System x iDataPlex dx360 M4 Types 7918 and 7919: User's Guide
IBM Systems Director is a workgroup-hardware-management tool that you can
use to centrally manage System x and xSeries servers. For more information,
see the IBM Systems Director documentation on the IBM Systems Director CD
and "IBM Systems Director" on page 10.
IBM X-Architecture technology combines proven, innovative IBM designs to make
your Intel-processor-based server powerful, scalable, and reliable. For more
information, see http://www.ibm.com/servers/eserver/xseries/xarchitecture/
enterprise/index.html.
™
– Active Memory
The Active Memory feature improves the reliability of memory through memory
mirroring. Memory mirroring mode replicates and stores data on two pairs of
DIMMs within two channels simultaneously. If a failure occurs, the memory
controller switches from the primary pair of memory DIMMs to the backup pair
of DIMMs. For more information about installing DIMMs for memory mirroring,
see "Installing a memory module" on page 30.
– Large system-memory capacity
The memory bus supports 32 GB of system memory when registered DIMMs
are installed. The memory controller supports error correcting code (ECC) for
8 industry-standard PC3-12800, 1600 MHz, DDR3 (third-generation
double-data-rate), synchronous dynamic random access memory (SDRAM)
dual inline memory modules (DIMMs).
The ServerGuide Setup and Installation CD, which you can download from the
web, provides programs to help you set up the server and install a Windows
operating system. The ServerGuide program detects installed optional hardware
devices and provides the correct configuration programs and device drivers. For
more information about the ServerGuide Setup and Installation CD, see "Using
the ServerGuide Setup and Installation CD" on page 39.
The server comes with an integrated dual-port Intel Gigabit Ethernet controller,
which supports connection to a 10 Mbps, 100 Mbps, or 1000 Mbps network. For
more information, see "Configuring the Gigabit Ethernet controller" on page 50.
This integrated security chip performs cryptographic functions and stores private
and public secure keys. It provides the hardware support for the Trusted
Computing Group (TCG) specification. You can download the software to support
the TCG specification, when the software is available. See http://www.ibm.com/
servers/eserver/xseries/scalable_family.html for details about the TPM
implementation. You can enable TPM support through the Setup utility under the
System Security menu option.
The simple-swap server model supports a 3.5-inch simple-swap SATA hard disk
drives.
The IBM Active Energy Manager solution is an IBM Systems Director plug-in that
measures and reports server power consumption as it occurs. This enables you
to monitor power consumption in correlation to specific software application
programs and hardware configurations. You can obtain the measurement values
through the systems-management interface and view them, using IBM Systems
Director. For more information, including the required levels of IBM Systems
Director and Active Energy Manager, see the IBM Systems Director