Panasonic SC-PT960 Operating Instructions Manual page 23

QUICK SETUP enables successive settings of the items in the shaded area.
∫ "VIDEO" menu
TV ASPECT
Choose the setting to suit your TV and
preference.
TV TYPE
Select to suit the type of TV.
TIME DELAY
When connected with a Plasma display,
adjust if you notice the audio is out of
sync with the video.
STILL MODE
Specify the type of picture shown when
paused.
BLACK LEVEL
Change the black level of the picture.
VIDEO OUT (I/P)
Select "PROGRESSIVE" only if
connecting to a progressive output
compatible TV.
∫ "AUDIO" menu
§
DOLBY DIGITAL
5
§
DTS
5
DYNAMIC RANGE
SPEAKER SETTINGS
Make settings for your speakers.
§4
Refer to "Frame still and field still" (➜ 37, Glossary).
§5
When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend
on the performance of this connected equipment.
≥ 4:3PAN&SCAN: Regular aspect TV (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥ 4:3LETTERBOX: Regular aspect TV (4:3)
Widescreen picture is shown in the letterbox style.
≥ 4:3ZOOM: Regular aspect TV (4:3)
The picture zooms in and out.
≥ 16:9NORMAL: Widescreen TV (16:9)
Laterally stretches image.
≥ 16:9SHRINK: Widescreen TV (16:9)
Images appear at the center of the screen.
≥ 16:9ZOOM: Widescreen TV (16:9)
Expands to 4:3 aspect ratio.
≥ STANDARD
≥ PROJECTION
≥ 0 ms/AUTO ≥ 20 ms
When using VIERA Link "HDAVI Control" with "HDAVI Control 3" compatible TV (➜ 26), select "0 ms/AUTO".
Audio and video will automatically be set in sync.
≥ AUTO
≥ FIELD §4
: The picture is not blurred, but picture quality is lower.
≥ FRAME §4
: Overall quality is high, but the picture may appear blurred.
≥ LIGHTER
≥ DARKER
≥ INTERLACE
≥ PROGRESSIVE: A message screen will appear. Follow the on-screen instructions.
≥ BITSTREAM
Select to suit the type of equipment you connected to the HDMI AV OUT
≥ PCM
terminal.
≥ BITSTREAM
Select "BITSTREAM" when the equipment can decode the bitstream (digital
≥ PCM
form of 5.1 channel data). Otherwise, select "PCM".
(If the bitstream is output to the equipment without a decoder, high levels of
noise can be output and may damage your speakers and hearing.)
≥ ON: Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with
Dolby Digital)
≥ OFF
≥ SETTINGS:
≥ C DELAY: 0ms, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker (➜ 25, Selecting the delay time of the speakers).
≥ SL/SR DELAY: 0ms, 5ms, 10ms, 15ms
Select the delay time for your surround speakers (➜ 25, Selecting the delay time of the speakers).
≥TEST TONE: SETTING
Use the test tone for speaker level adjustments (➜ 29, Adjusting the speaker level).
≥CENTER, SURROUND RIGHT, SURROUND LEFT: `6 dB to i6 dB (Factory preset: 0 dB)
≥ CRT ≥ LCD
≥ PLASMA
≥ 40 ms ≥ 60 ms ≥ 80 ms ≥100 ms
(Continued on next page)
23