SWELLPRO SPRY Firmware Update Instruction

SPRY Firmware Update Instruction
V2.6
【But normally we
The Spry drone and the Spry remote controller can be updated by a firmware updater.
only update the drone firmware. 】
** Swellpro Firmware Tool only runs in Win7 & Win10 PC. Don't support iOS.
** Got report some Win7 PC can't run this FirmwareTool. If you have the same problem, try to
download a plugin and try: https://www.microsoft.com/en-US/download/confirmation.aspx?id=42642
** Shut down all the Anti-virus software and Remove the U disk from PC.

1. Download and unpack the file:

SwellproFirmwareTool. zip. This is a compressed Windows folder,
which can be decompressed with programs such as WinZip, WinRar or 7zip.

2. Download the latest Spry firmware file

"FW_FC_FF1_2019....bin" from swellpro. com.
3. From the unpacked Updater folder, run the file: SwellproFirmwareTool. exe
To update the Spry Drone firmware
4. Plug the Spry into the Windows PC using a good quality micro USB cable and wait for the Update
button to light up.
5. Click on "Firmware for Device 1" to select the drone firmware file (eg: FW_FC_FF1_2019....bin)
and then CLICK (1) on the right side, and then click Update.
6. Firmware update progress is displayed. Once completed, the Spry will reboot and sound a tone.