Connections With A Component Video Cable; Connections With An Hdmi Cable - Panasonic SC-BT300 Operating Instructions Manual

Connections with a component video cable

Do not disconnect the video cable even if the below is connected. Some features may not be displayed.
TV
Component
Video cable
(not included)
AC IN
Main unit
≥Connect to terminals of the same color.
≥Set "Black Level Control" to "Darker". (
≥Using the COMPONENT VIDEO OUT terminal, while playing DVD-Video, the video output resolution is limited to "480p".
NOTE
≥Be sure your TV supports at least 480p. Set "Component Video Resolution" to "480p", "720p" or "1080i". (
≥Set "High Clarity Sound" in the on-screen menu to "Off" (
To enjoy high definition/progressive video
≥Connect to a TV that supports 480p or higher.
≥Set "Component Video Resolution" to "480p", "720p" or "1080i". (
TIPS
≥Set "HDMI Video Mode" to "Off". (

Connections with an HDMI cable

Do not disconnect the video cable even if the below is connected. Some features may not be displayed.
[BT303]
HDMI cable
1
HDMI
AV IN
compatible
TV
HDMI cable
(only included
with SC-BT303)
AC IN
Main unit
≥\BT303\
: Do not use any other HDMI cables except the supplied one.
≥Non-HDMI-compliant cables cannot be utilized.
≥[BT300] [BT200] \BT203\
NOTE
recommended that you use Panasonic's HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m/3.3 ft), RP-CDHG15 (1.5 m/4.9 ft), RP-CDHG20 (2.0 m/6.6 ft), RP-CDHG30 (3.0 m/9.8 ft),
RP-CDHG50 (5.0 m/16.4 ft), etc.
≥This unit incorporates HDMI (Deep Color, x.v.Color
≥When outputting 1080p signal (
NECESSARY SETTINGS
"HDMI Video Mode" : "On"/"HDMI Audio Output" : "Off" (
With this connection, you can use VIERA Link "HDAVI Control" (
TIPS
To enjoy TV audio from this home theater system's speakers
*1 You can enjoy the audio from your TV through this home theater system's speakers by connecting to the "AUX(TV)" terminal or
"OPTICAL 1(TV)" terminal. (
TIPS
*2 This is the preferred connection for best sound and true surround sound.
This unit can decode the surround signals received from your TV. Refer to the operating instructions for the TV for the settings
necessary to output its audio from the digital audio output to your home theater system. Only Dolby Digital and PCM can be played
with this connection.
– After making this connection, make settings to suit the type of audio from your digital equipment (
COMPONENT
VIDEO IN
Y
AUDIO OUT
P
B
L
P
R
R
AUX(TV)
AUX(TV)
SPEAKERS
+
-
(
6 5 2 1 4 3 8 7 )
AV OUT
3 Ω
3 Ω 3 Ω 3 Ω 3 Ω
SUB-
R L R L R L
WOOFER CENTER FRONT SURROUND SURROUND BACK
37)
39) Otherwise, the video is output as 480i.
AUDIO OUT
L
R
AUX(TV)
AUX(TV)
SPEAKERS
+
-
(
6 5 2 1 4 3 8 7
) AV OUT AV OUT
3 Ω
3 Ω 3 Ω 3 Ω 3 Ω
SUB- R L R L R L
WOOFER WOOFER CENTER FRONT SURROUND SURROUND BACK
HDMI AV OUT
: Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is
TM , High Bit rate Audio) technology. (
39, "HDMI Resolution"), please use HDMI cables 5.0 m (16.4 ft) or less.
27)
Audio cable*
1
(not included)
The optical digital audio
cable can be used when
connecting to televisions
with optical out terminals
( right).
COMPONENT VIDEO OUT
Y Y P P
B B
OPTICAL
P P 2(STB) 1(T
R R
VIDEO VIDEO COMPONENT COMPONENT VIDEO
OUT OUT VIDEO OUT VIDEO OUT DIGITAL IN OUT
36). (Otherwise, the video will not be output.)
39)
Audio cable*
1
(not included)
The optical digital audio
cable can be used when
connecting to televisions
with optical out terminals
( right).
Y P B
OPTICAL
P 2(STB) 1(T
R
VIDEO VIDEO COMPONENT
OUT OUT
VIDEO OUT DIGITAL IN
39)
28).
OPTICAL
OUT
Optical digital
audio cable*
(not included)
OPTICAL 1(TV)
P
B
OPTICAL
P 2(STB) 1(TV)
R
COMPONENT
75Ω LOOP EXT
VIDEO OUT DIGITAL IN
FM ANT AM ANT
LOOP ANT GND
39)
OPTICAL
OUT
Optical digital
audio cable*
(not included)
OPTICAL 1(TV)
P B
OPTICAL
P 2(STB) 1(TV)
R
VIDEO COMPONENT
OUT 75Ω LOOP EXT
VIDEO OUT DIGITAL IN
FM ANT AM ANT
LOOP ANT GND
54, 55)
27).
1,2
1,2
RQT9508
11