Connections With A Component Video Cable; Connections With A Hdmi Cable - Panasonic SC-BT205 Operating Instructions Manual

Connections with a component video cable

Do not disconnect the video cable even if the below is connected. Some features may not be displayed.
TV
Component
Video cable
(not included)
AC IN
Main unit
≥Connect to terminals of the same colour.
≥Set "High Clarity Sound" on the on-screen menu to "Off" (
(Otherwise, the video will not be output.)
NOTE
≥The video output resolution is restricted to "576p/480p" when DVD-Video discs, DivX and BD-Video discs recorded at a rate of 50
field per second are output from the COMPONENT VIDEO OUT terminals.
To enjoy high definition/progressive video
≥Connect to a television that supports 576p/480p or higher.
≥Set "Component Resolution" to "576p/480p", "720p" or "1080i". (
TIPS
≥Set "HDMI Video Mode" to "Off". (

Connections with a HDMI cable

Do not disconnect the video cable even if the below is connected. Some features may not be displayed.
HDMI
compatible
AV IN
TV
HDMI cable
(not included)
AC IN
Main unit
≥If there is more than one HDMI terminal, refer to the operating instructions for the TV to determine terminal to connect to.
≥Non-HDMI-compliant cables cannot be utilized.
≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use
NOTE
Panasonic's HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.
≥This unit incorporates HDMI
≥When outputting 1080p signal
NECESSARY SETTINGS
"HDMI Video Mode" : "On"/"HDMI Audio Output" : "Off" (
With this connection, you can use VIERA Link "HDAVI Control" (
TIPS
To enjoy TV audio from this home theater system's speakers
* 1 You can enjoy the audio from your TV through this home theater system's speakers by connecting to the "AUX(TV)" terminal or
"OPTICAL 1(TV)" terminal. (
TIPS
* 2 This is the preferred connection for best sound and true surround sound.
This unit can decode the surround signals received from your TV. Refer to the operating instructions for the TV for the settings necessary to
output its audio from the digital audio output to your home theater system. Only Dolby Digital and PCM can be played with this connection.
– After making this connection, make settings to suit the type of audio from your digital equipment (
COMPONENT
VIDEO IN
Y
AUDIO OUT
P
B
L
P
R
R
AUX(TV)
AUX(TV)
SPEAKERS
+
-
6 5 2 1 4 3
AV OUT
3 Ω SUB-
3 Ω 3 Ω 3 Ω
R L R L
WOOFER CENTER FRONT SURROUND
39) Otherwise, the video is output as 480i.
AUDIO OUT
L
R
AUX(TV)
AUX(TV)
SPEAKERS
+
-
6 5 2 1 4 3 AV OUT
3 Ω SUB-
3 Ω 3 Ω 3 Ω
R L R L
WOOFER CENTER FRONT SURROUND
HDMI AV OUT
TM (V.1.3a with Deep Colour, x.v.Colour
(
39, "HDMI Video Format") please use HDMI cables 5.0 meters or less.
27)
Audio cable*
1
(not included)
The optical digital audio
cable can be used when
connecting to televisions
with optical out terminals
( right).
COMPONENT VIDEO OUT
Y Y P P
B B
OPTICAL
P P 2(STB) 1(T
R R
VIDEO VIDEO COMPONENT COMPONENT VIDEO
OUT OUT OUT
VIDEO OUT VIDEO OUT DIGITAL IN
36).
39)
Audio cable*
1
(not included)
The optical digital audio
cable can be used when
connecting to televisions
with optical out terminals
( right).
Y Y P P
B B
OPTICAL
P P 2(STB) 1(T
R R
VIDEO VIDEO COMPONENT COMPONENT VIDEO
OUT
OUT OUT VIDEO OUT VIDEO OUT DIGITAL IN
TM , High Bit rate Audio) technology. (
39)
28).
OPTICAL
OUT
Optical digital
audio cable*
(not included)
OPTICAL 1(TV)
P
B
OPTICAL
FM ANT
75Ω
P 2(STB) 1(TV)
R
COMPONENT
VIDEO OUT DIGITAL IN
OPTICAL
OUT
Optical digital
audio cable*
(not included)
OPTICAL 1(TV)
P
B OPTICAL
FM ANT
75Ω
P
R 2(STB) 1(TV)
COMPONENT
VIDEO OUT DIGITAL IN
55, 56)
27).
1,2
1,2
RQT9516
11
11