Connections To A Set Top Box, Etc - Panasonic SC-BT300 Operating Instructions Manual

Connections to a Set Top Box, etc.

Use the following connections when you want to output the original surround audio from your Set Top Box, cable TV, VCR, DVD recorder, etc.
through this unit's speakers.
≥Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly.
≥Turn off all equipment before connection.
TV
AC IN
Main unit
≥This unit can decode the surround signal from the Set Top Box (Satellite receiver, Cable box, etc.).
Press [EXT-IN] several times to select "D-IN 2" (DIGITAL IN 2*).
* "(CABLE/SAT)" is displayed next to DIGITAL IN 2 when set for CABLE/SAT AUDIO input. (
TIPS
"HDAVI Control")
≥For connections between this unit and the TV, refer to "TV connections". (
≥If you have various sound sources and this unit's terminals are not sufficient, connect them to the available inputs on the TV and the
TV output should then be connected to the "AUX(TV)" or "OPTICAL 1(TV)" terminal of the main unit.
Refer to the operating instructions of the TV, video cassette recorder, DVD recorder or Set Top Box for settings to output its audio via
AUDIO OUT or OPTICAL OUT terminal of the TV.
– In some cases the audio signal will only be output as 2ch audio from the TV. In this case, connect the Set Top Box (Satellite
receiver, Cable box, etc.) that will be used most commonly with multi-channel audio to this unit's "OPTICAL IN 2(STB)" terminal.
RQT9508
12
Refer to the operating instructions of the respective devices
for the optimal connections.
SPEAKERS
6 5 2 1 4 3 8 7
3 Ω
3 Ω 3 Ω 3 Ω 3 Ω
SUB-
R L R L R L
WOOFER CENTER FRONT SURROUND SURROUND BACK
OPTICAL 2(STB)
AUX(TV)
Y P
B
OPTICAL
+
-
P 2(STB) 1(TV)
R
VIDEO COMPONENT
(
75Ω LOOP
) OUT VIDEO OUT DIGITAL IN
AV OUT
FM ANT AM
LOOP
10, 11)
STB, VCR, DVD recorder, etc.
OPTICAL
OUT
DIGITAL
DIGITAL
TRANSMITTER
PUSH PUSH
TRANSMITTER
EXT
ANT
ANT GND
28, Setting the TV audio for VIERA Link
Optical digital
audio cable
(not included)