Subscribe to Our Youtube Channel
Related Manuals for GreenWorks 2100007AU
Summary of Contents for GreenWorks 2100007AU
- Page 1 2100007AU STRING TRIMMER OPERATOR MANUAL Greenworks Australia A Division Jak Max P/L 380 Foley’s Road Derrimut Victoria, Australia 3026 STG304 www.greenworksaustralia.com...
- Page 2 STG304...
- Page 3 STG304 = 1.65 mm (0.0005 ft.) 5.5 m (18 ft.)
- Page 4 English Controls............. 6 Description......... 2 Start the machine..........6 Purpose.............. 2 Stop the machine..........6 Overview............2 Operation tips............ 6 Introduction........2 Cutting tips............6 General power tool safety Adjust the length of the cutting line....6 warnings..........2 Adjust the length of the cutting line Training..............2 manually............
- Page 5 English DESCRIPTION Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your battery- PURPOSE operated (cordless) power tool. This machine is used to cut grass, light weeds, and other 3.1 TRAINING similar vegetation at or around ground level. The cutting plane must be approximately parallel to the ground surface.
-
Page 6: Operation
English • Before use, always visually • whenever the power tool is inspect the power tool for left unattended; damaged, missing or • before clearing a blockage; misplaced guards or shields. • before checking, cleaning or working on the power tool; 3.3 OPERATION •... -
Page 7: Symbols On The Product
English • When not in use, store the control of the power tool in power tool out of the reach of unexpected situations. children. • Dress properly. Do not wear loose clothing or jewellery. 3.5 SERVICE Keep your hair, clothing and •... -
Page 8: Installation
English RECYCLE Symbol Explanation Wear head protection. Separate collection. You must not discard with usual household waste. If it is necessa- ry to replace the machine, or if it is no more use to you, do not discard it with household Wear eye and ear protection. -
Page 9: Cutting Tips
English ATTACH THE GUARD WARNING Be careful when you operate the machine. Figure 2. WARNING CONTROLS Do not touch the cut-off blade. START THE MACHINE 1. Remove the screws from the trimmer head with a Phillips head screwdriver (not included). Figure 5. - Page 10 English 9.10 CHANGE TO THE EDGING MODE NOTE The machine has an auto-feed head. It will damage the Figure 6. machine if you hit the head to try to advance the line. NOTE NOTE You can change the machine to a well groomed edger for edging patios, driveways and walkways or other areas.
-
Page 11: Transportation And Storage
English TRANSPORTATION AND 10.2 CLEAN THE MACHINE STORAGE • Clean the machine after use with a moist cloth dipped in neutral detergent. 11.1 MOVE THE MACHINE • Do not use aggressive detergents or solvents to clean the plastic parts or handles. When you move the machine, you must: •... -
Page 12: Technical Data
Lines are worn too Advance the cutting line. short. Lines are tangled 1. Remove the lines from Noise value. on spool. the spool. 2. Wind the lines. WARRANTY (The full warranty terms and conditions can be found on Greenworks webpage) - Page 13 English The Greenworks warranty is 4 years on the product, and 2 years on batteries (consumer/private usage) from the date of purchase. This warranty covers manufacturing faults. A faulty product under warranty might be either repaired or replaced. A unit that has been misused or used in other ways then described in the owner’s manual might be rejected for...
Need help?
Do you have a question about the 2100007AU and is the answer not in the manual?
Questions and answers