Subscribe to Our Youtube Channel
Related Manuals for GreenWorks 2100000
Summary of Contents for GreenWorks 2100000
- Page 1 40V BRUSHLESS Cutter/String Trimmer 2100000 60-2332 Owner’s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Read all safety rules and instructions carefully before operating this tool.
-
Page 2: Table Of Contents
CONTENTS Introduction .......................... 2 Important Safet y Instructions................3 - 5 Symbols ..........................6 -7 Know your power head ......................8 - 9 Assembly ........................9 -12 Operation ........................12-19 Maintenance ......................... 20-21 Troubleshooting ......................... Warranty..........................Exploded view and Part list .................... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS W A R N I N G Read and understand all instructions before using this product. Failure to follow all • liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. • Do not allow children or untrained individuals to use this unit. •... -
Page 4: Important Safety Instructions
• Remove or disconnect battery before servicing, cleaning or removing material from the gardening appliance. • Use only Greenworks batteries. • Store idle appliances - When not in use, string trimmer should be stored indoors in a dry, locked place out of the reach of children. - Page 5 IMPORTANT SAFETY INSTRUCTIONS • If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. • Do not point the string trimmer in the direction of people or pets. •...
-
Page 6: Symbols
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) -
Page 7: Symbols
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. -
Page 8: Know Your String Trimmer
KNOW YOUR STRING TRIMMER KNOW YOUR STRING TRIMMER (See Figure 1.) The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules, in both this manual and the operator’s manuals for all attachments that your are using with this power head. -
Page 9: Assembly
ASSEMBLY UNPACKING This product requires assembly. • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. •... - Page 10 ASSEMBLY SLOT WING SCREW GRASS DEFLECTOR Fig.2 INSTALLING AN ATTACHMENT TO THE POWER HEAD(See Figure 3.) W A R N I N G Read and understand entire Operator’s Manual for each optional attachment used on this power head and follow all warnings and instructions. Failure to follow all instructions may result in W A R N I N G Never install, remove, or adjust any attachment while power head is running.
- Page 11 ASSEMBLY REMOVING THE ATTACHMENT FROM THE POWER HEAD For removing or changing the attachment: • Stop the power head. • Loosen the knob. • Push in the button and twist the shafts to remove and separate ends. ATTACHING THE FRONT HANDLE(See Figure 4.) Fig.4 •...
-
Page 12: Operation
OPERATION W A R N I N G Read and understand entire Operator’s Manual for each optional attachment used on this power head and follow all warnings and instructions. Failure to follow all instructions may result in W A R N I N G Do not allow familiarity with product to make you careless. - Page 13 OPERATION Fig.5 OPERATING THE TRIMMER (See Figures 6) W A R N I N G Motor housing may become hot during operation. Do not rest or place your arm, hand, or any 13 (depending on attachment used) during trimmer operation with all body parts clear of motor housing (or as shown in the applicable attachment Operator’s Manual).
- Page 14 OPERATION Fig.6 W A R N I N G Always hold the power head away from the body keeping clearance between the body and the product. Any contact with the attachment cutting head can result in burns and/or other serious personal injury..
- Page 15 OPERATION INSTALLING THE STRING HEAD See Figure 7 • Disconnect the battery from the unit • Remove currently installed string head • Place the washer #2 on the end of the drive shaft, make sure hole 'A' and 'B' are aligned. Insert a suitable screw driver through the two holes.
- Page 16 OPERATION HOW TO REPLACE THE SPOOL See Figure 8 REMOVE THE SPOOL COVER Stop the motor and disconnect the battery from the unit Press the spool retainer tabs 'A' on both sides of the spool retainer to release the spool cover. (This may take some presssure to release the tabs"...
- Page 17 OPERATION HOW TO REPLACE THE LINE See Figure 9 INSTALLING NEW LINE IN THE SPOOL · Remove the spool from the spool cover · Bend one 8’ length (3m) of line in the middle and hook the string in location ‘d’ ·...
- Page 18 OPERATION INSTALLING THE BRUSH CUTTER See Figure 10 Figure 10 1. Ensure the 'A' is installed on the shaft of the trimmer. 2. Insert a suitable screw driver through the two holes. 3. Place the Brush-cutter Blade 'B' on top of the spacer 'A' ensuring it is centered. 4.
- Page 19 OPERATION LINE TRIMMING CUT-OFF BLADE See Figure 11 CUT-OFF BLADE Figure 11 CUTTING TIPS See Figure 12 • Avoid hot surfaces by always keeping the tool away from your body. (Proper operating position • Keep the trimmer tilted toward the area being cut; this is the best cutting area. •...
-
Page 20: Maintenance
MAINTENANCE W A R N I N G When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. W A R N I N G Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. -
Page 21: Troubleshooting
MAINTENANCE NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be damaged by certain aromatic oils such as pine and lemon, and by solvents such as kerosene. STORING THE POWER HEAD • Clean all foreign material from the product. •... -
Page 22: Warranty
(4) years against defects in materials, parts or workmanship. GREENWORKS™, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty is valid only for... - Page 23 EXPLODED VIEW...
- Page 24 PART LIST ITEM NO. PART NO. DESCRIPTION 31102975 Battery 311202836 Upper shaft 31121836 Front handle 31112836 Lower shaft 34107511-3 Knob 33307825 Guard connecter 31108836 Trimmer head 31114836 Guard 31102980 Charger...
- Page 25 TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) Rev: 01 (01-28-14) Printed in China on 100% Recycled Paper...
Need help?
Do you have a question about the 2100000 and is the answer not in the manual?
Questions and answers