Nano RITE Hearing Systems – Overview Selection Chart for Acoustic Options Fitting Ranges Selecting the Speaker Unit Length Attaching the Speaker Unit to a Nano RITE Hearing System Detaching the Speaker Unit from a Nano RITE Hearing System M-Speaker Unit...
The Nano RITE receiver-in-the-ear hearing instrument is easy to handle and comfortable to wear. Its unique design in combination with advanced technology delivers tangible end user benefi ts. This guide is designed to help you fi t and manage Nano RITE hearing systems. 1 Push button...
NaNo RITE HEaRINg SySTEmS Selection Chart for acoustic options fitting Ranges Nano RITE hearing systems offer two speaker units: the M-Speaker, which is appropriate for mild to Fitting moderately severe losses, while the P-Speaker provides additional power for severe hearing losses.
Correct speaker unit attachment is imperative. while no. 4 is the longest. Before fi tting Nano RITE hearing instruments, it is necessary to determine the correct speaker unit length. The measurement procedure is the same for both the M-Speaker and 1 Slide the connector plug into the connector the P-Speaker.
NaNo RITE HEaRINg SySTEmS m-Speaker unit detaching the Speaker unit from a Nano RITE Hearing System 1 Use the pointed end of the disassembly tool to The M-Speaker unit is suitable for mild to moderately severe losses and comes in four lengths. It can push the lock pin free.
NaNo RITE HEaRINg SySTEmS Custom molds for the m-Speaker For custom fi ttings two different types of molds can be attached to the M-Speaker. The Micro Mold Attaching the Lite Tip and the Micro Mold to the M-Speaker Unit and the Lite Tip come with an adapter already inserted, colored red (right) or blue (left) to indicate Use the cup pin of the Lite Tip tool for curved which ear.
NaNo RITE HEaRINg SySTEmS P-Speaker unit for Power fittings Detaching the Micro Mold from the M-Speaker The P-Speaker unit contains a high performance receiver which requires ample room in the ear canal. To determine if your client’s ear canal can accommodate this receiver, please use the measurement gauge supplied.
NaNo RITE HEaRINg SySTEmS Custom fit with Power mold Changing from a Power dome to a Power mold Power Molds are made from an impression similar to one needed for an in-the-canal hearing instrument. 1 Remove the transparent cover on the It is possible to include a vent up to a maximum of 2.4 mm if specifi ed at the time of order.
Changing the NoWax filter and the WaxStop WaxStop System Nano RITE hearing systems are programmed with Oasis using new standard (no. 2) programming cables. The WaxStop system is applicable for the following acoustic setups: Please always insert a fresh battery prior to programming.
NaNo RITE HEaRINg SySTEmS ordering Information 1.3 P-SPEaKER uNIT aSSEmBLIES Part Number Designation Comments 1 SPEaKER uNITS 118667 Speaker assembly P, 1L 118668 Speaker assembly P, 2L 1.1 m-SPEaKER uNITS 118669 Speaker assembly P, 3L Part Number Designation Comments 118670...
Page 12
NaNo RITE HEaRINg SySTEmS 4 WaX fILTERS 6 SPEaKER PaRTS Part Number Designation Comments Part Number Designation Comments NoWax system 689-30-302-08 For instant fi t For M-Speaker with Turtle with 6 fi lters each (10 turtles) 654-01-570-00 Dome adapter, transparent...
Need help?
Do you have a question about the Nano RITE and is the answer not in the manual?
Questions and answers