Tele System SOUND LED08 Manual page 38

5 Basic Function
5.1 Power / Standby
While the TV is in operation, to turn it off, press the Power button on your
remote control. The LED on the front panel of the TV will change from green to
red.
To switch the TV on again, press the Power button (on the remote control or on
the TV).
5.2 Program selection
To select a program, press the P+/P- buttons or use the numeric keys for
direct channel selection.
5.3 Volume regulation
Press the V- / V+ buttons on the standard remote control to increase / decrease
the volume.
5.4 Mute (temporary)
Pressing the MUTE button, the sound is interrupted and the video shows the
symbol of the function. To reactivate the sound, you can press the MUTE button
again or one of the volume buttons V- / V +.
5.5 Program recall
You can recall the previously selected program by pressing the BACK button
and by pressed it again, it returns to the program you were watching.
5.6 Source selection
By pressing the Source button, you can select the TV mode:
DTV: To activate the Digital TV mode and allow the reception of digital TV
programs;
SCART: To enable SCART input
AV: to enable the AV input (RCA)
YPbPr: to activate the YPbPr input.
HDMI: to activate the HDMI input.
PC: to activate the PC mode
USB: to access content loaded on a USB memory. (See Chapter 16)
10