Viewing Images On A Tv Set - Canon PowerShot G3 User Manual

Viewing Images on a TV Set

A video-compatible television connected via the supplied AV cable AVC-DC100 can
be used to view images as you shoot or replay them.
1
Turn off the camera (p. 29).
2
3
Yellow
Video In Jack
Plug
Black
Audio In Jack
Plug
4
Turn on the TV and switch it to Video mode.
5
Turn the mode lever to
• The image will appear on the TV. Shoot or replay images as usual.
• If the images are not appearing on the TV when shooting, press the
button.
• No image will appear on the LCD monitor when the camera is connected to a TV
monitor.
• The video output signal can be switched (NTSC or PAL) to accommodate different
regional standards (p. 165). The default setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If an incorrect video system is set, the output image will not display properly.
• If the TV is a stereo model, you can plug the audio plug into either the left or right
Audio In jack. Please refer to the TV´s manual for details.
• A TV monitor cannot be used in
154
Attach AV Cable AVC-DC100 to the
Plug the other ends of the AV cable to
To the
the video in and audio in jacks on the TV.
To the
or
terminal on the camera.
(p. 28, 29).
mode.