Canon PowerShot G3 User Manual page 159

3
Select images for transferring.
Single Images
• Select an image using the main dial or the B or
A arrow on the omni selector and mark or
remove marks from images using the C or D
arrow on the omni selector.
• You can use the same procedures to select images in
index replay (3 images). Press the
switch between single replay and index replay.
All the Images on a CF Card
• Press the button to switch to index replay (three
images).
• Then press the
using the C or D arrow on the omni selector and
press the
instead of [Mark all], you can remove marks
from all the images.)
• You can select images using the main dial or the
B or A arrow on the omni selector and change
the settings using the C or D arrow on the omni
selector after [Mark all] or [Clear all] has been
selected.
4
Press the
• The selection mode will turn off and the Transfer Order menu will reappear.
• Images are transferred in order from oldest to newest by the shooting date.
• A maximum of 998 images can be marked per CF card.
• Transfer settings can also be assigned to images with the supplied software
programs on a computer.
button, and select [Mark all]
button again. (If you select [Clear all]
button.
button to
153