Flat Tyre - Mercedes-Benz SLS AMG Owner's Manual

on safety-related systems must be carried out
at a qualified specialist workshop.
G
WARNING
TIREFIT must not come into contact with your
skin, eyes or clothing.
If TIREFIT comes into contact with your
R
eyes or skin, immediately rinse thoroughly
with clean water.
Change out of clothing which has come into
R
contact with TIREFIT immediately.
If an allergic reaction occurs, consult a doc-
R
tor immediately.
Keep TIREFIT away from children.
If TIREFIT is swallowed, immediately rinse
R
your mouth out thoroughly and drink plenty
of water.
Do not induce vomiting. Consult a doctor
R
immediately.
Do not inhale TIREFIT fumes.
R
You can use the TIREFIT kit to seal small
punctures, particularly those in the tyre tread.
You can use TIREFIT at outside temperatures
down to -40 †.
Do not remove any foreign objects which
X
have penetrated the tyre, e.g. screws or
nails.
Take the TIREFIT kit out of the boot
X
( page 203).
Y
Open the TIREFIT kit and remove "max.
X
80 km/h" sticker D.
Affix sticker D within the driver's field of
X
vision.
i
If TIREFIT leaks out, allow it to dry. It can
then be removed like a layer of film.
If you get TIREFIT on your clothing, have it
cleaned as soon as possible with perchloro-
ethylene.
Comply with the manufacturer's safety
instructions on the tyre inflation compressor
label and on the tyre sealant bottle.
i
You will also find operating instructions
= in the lid of the TIREFIT kit.
Pull the cable and filler hose E out of the
X
housing.
Unscrew flanged cap A.
X
Unscrew the cap from tyre sealant bot-
X
tle :. Make sure that the aluminium film
is not damaged when doing so.
Screw tyre sealant bottle : clockwise
X
tightly onto flange seal F.
This pierces the aluminium film.

Flat tyre

205
Z