Control Panel & Operation - Soleus Air KY4-100 Operating Instructions Manual

CONTROL PANEL & OPERATION
1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes:
Air Conditioner and Dehumidifier.
3) Fan Speed Control - Press the FAN Button to cycle through the different fan speeds: High and low.
Temperature - Select the desired temperature by pressing either ▼ or ▲ button when using the unit in
4)
cooling mode. The temperature indicator flashes to display the desired temperature setting. After the tem-
perature is set, the unit will display this temperature setting until it is changed by the user. Press the ▼ and
▲ buttons simultaneously on the control panel to change between Celsius or Fahrenheit.
Auto-on Timer - To program the Auto-on timer, press the TIMER button when the unit is powered off.
5)
Press the ▲ or ▼ buttons to change the timer to the desired amount of time (1-24 hours) for the unit to
automatically turn on.
Auto-off Timer - To program the Auto-off Timer , press the TIMER button when the unit is powered on.
6)
Press the ▲ or ▼ buttons to change the timer to the desired amount of time (1-24 hours) for the unit to
automatically turn on.
7) Swing - To start side-to-side louver oscillation, press the Swing button once. The SWING light will light
up on the control panel. To stop oscillation, press the Swing button again. Vertical air flow direction can be
adjusted manually.
NOTE: HEAT MODE is not available on this model.
9